Use the Warmoth Builder to design a body or neck just the way you want it. View every option we offer and spec your build down to the last detail.
The Builder guides you step-by-step and makes customizing your guitar or bass parts easy.
Build
Custom build your own
Strat® Neck
The Warmoth Showcase lets you view photos and buy from our current selection of bodies and necks. We stock a large range of options so there
is a good chance what you’re looking for is already there. It’s the quickest and cheapest way to get the parts you need.
Browse
IN STOCK
Strat® Necks
Vintage Modern Construction
Our Vintage Modern neck combines vintage-Fender®-style neck design with modern refinements that improve playability and convenience. There is no finer neck of this type on the market. Features include:
- Single-style truss rod that adjusts at headstock
- Compound radius fingerboard (other options available)
- One piece maple necks, two piece mixed-wood necks
- Walnut skunk stripe
- Warm vintage tone
The Single-style Truss Rod
Warmoth Vintage Modern necks use a single truss rod design. The rod is attached to a fixed anchor at the heel end of the neck. An anchored adjustment nut at the other end is accessible through an opening at the headstock. The rod sits in a concave channel within the neck, and is installed through a long opening in the back on both one and two piece necks. Once installed in its channel the rod takes a slightly curved or bowed position.
As the adjustment nut is tightened the anchor and nut, unable to pass through the narrow channel ends, begin to exert inward compression on the neck wood. The end of the rod is drawn outwards, and the center upwards towards a staight line. When the nut is loosened the rod relaxes back towards its neutral bowed position.
Characteristics of the Vintage Modern neck include:
- Adjustments can be made without removing the neck
- Light weight and minimum mass
- Less torque required for adjustment
- Usually requires seasonal adjustments for optimum action
Compound Radius Fingerboard
Over twenty years ago Warmoth pioneered the concept of a conical playing surface. The idea was to keep the lower registers of the
fingerboard with a rounder feel, more comfortable for chording and rhythm playing but at the same time to flatten the high registers
for easier string bending. The compound radius accomplishes this with a continuously flattening radius beginning with a 10 inch
radius at the string nut to a 16 inch radius at the 22nd fret. This compound radius isn't something that feels readily apparent to the
playing hand in any noticeable way other than the fact that it is very comfortable to play on. With a professional set-up, these
necks play exceptionally well.
Fingerboard Length Options
Standard 22 Fret
A fingerboard with 22 frets is considered the industry "standard" for the last few decades and sports the typical 1/4" overhang off the end of the heel. This has always been the standard spec for our Vintage Modern series.
(Vintage Modern Tele® neck shown)
21 Fret Option
A fingerboard with 21 frets is considered a "vintage" spec, where the fingerboard is flush with the neck heel. You may have one less fret to play on but you will find that taking off and putting on a pickguard is much easier without the the fingerboard overhang.
(Vintage Modern Tele® neck shown)
Available Options for Vintage Modern Construction Stratocaster® Replacement Necks
Click on the
for more information about that option.
-
Left Handed
-
Right Handed
-
Right Handed Reverse
-
1-11/16"
-
1-3/4" [$25.00]
-
1-5/8"
-
59 roundback [$35.00]
-
Boatneck
-
Clapton [$35.00]
-
Fatback
-
SRV [$35.00]
-
Standard thin
-
Wolfgang [$35.00]
-
10-16" Compound
-
Straight 10" [$35.00]
-
Straight 10.5" [$35.00]
-
Straight 11" [$35.00]
-
Straight 11.5" [$35.00]
-
Straight 12" [$35.00]
-
Straight 12.5" [$35.00]
-
Straight 13" [$35.00]
-
Straight 13.5" [$35.00]
-
Straight 14" [$35.00]
-
Straight 14.5" [$35.00]
-
Straight 15" [$35.00]
-
Straight 15.5" [$35.00]
-
Straight 16" [$35.00]
-
Straight 9.0" [$35.00]
-
Straight 9.5" [$35.00]
-
3 Bolt [$15.00]
-
No Mounting Holes [$15.00]
-
Standard 4 Bolt
-
Black Corian - Earvana Nut [$65.00]
-
Black Corian - Standard Nut [$25.00]
-
GraphTech Black TUSQ XL - Earvana Nut [$69.00]
-
GraphTech Black TUSQ XL - Standard Nut [$30.00]
-
GraphTech White TUSQ - Earvana Nut [$69.00]
-
GraphTech White TUSQ XL - Standard Nut [$30.00]
-
LSR Prep [$45.00]
-
No Nut Install
-
White Corian - Earvana Nut [$65.00]
-
White Corian - Standard Nut [$25.00]
-
Gotoh/Grover (13/32" 11/32")
-
Planet Waves(13/32")
-
Schaller (25/64" 11/32")
-
Sperzel (25/64")
-
Vintage Style (11/32")
Nickel
6100
.118" X .058"
$0.00
6105
.095" X .045"
$0.00
6130
.106" X .036"
$0.00
6150
.103" X .046"
$0.00
6230
.080" X .037"
$0.00
Stainless Steel
SS6105
.095" X .047"
$20.00
SS6115
.108" X .051"
$20.00
SS6230
.080" X .043"
$20.00
SS6100
.110" X .057"
$20.00
SS6150
.104" X .047"
$20.00
Gold
GD6150
.104" X .047"
$30.00
GD6100
.110" X .057"
$30.00
Fretless
Lined Fretless
$85.00
Fretless
$0.00
No Frets
No Frets Slots Only
$0.00
Clear Gloss
$90.00 - Maple Necks with Maple Fingerboards (Entire neck will be finished)
$80.00 - Maple Necks with non-maple Fingerboards (No finish on the fingerboard)
$110.00 - Non-Maple necks (No finish on the fingerboard)
Clear Satin
$80.00 - Maple Necks with Maple Fingerboards (Entire neck will be finished)
$70.00 - Maple Necks with non-maple Fingerboards (No finish on the fingerboard)
$100.00 - Non-Maple necks (No finish on the fingerboard)
Vintage Tint Gloss or Satin
$110.00 - Maple Necks with Maple Fingerboards (Entire neck will be finished)
$100.00 - Maple Necks with non-maple Fingerboards (No finish on the fingerboard)
$130.00 - Non-Maple necks (No finish on the fingerboard)